ANALIZADOR DE COMPUESTOS ORGÁNICOS VOLÁTILES BTEX
Cromatografía de gases (GC) acoplada a un detector PID. Monitor QAL1 VOC certificado según EN 14662-3 para medición de benceno
Analizador compacto y totalmente automatizado que proporciona un rendimiento igual al de los cromatógrafos de laboratorio; Especialmente adecuado para estaciones fijas o móviles para controlar la calidad del aire ambiente.
• Compuestos medidos estándar: Benceno, Tolueno, Etilbenceno, m+p-Xileno, o-Xileno, 1-3 Butadieno (otros compuestos bajo pedido)
Es posible comprobar rápidamente los cromatogramas directamente en la pantalla, sin necesidad de utilizar un ordenador.
- Features & Benefits
- Main applications
- Technical Specifications
- Technical Data
- Approvals & Certifications
- Downloads
- Standard measured compounds: Benzene, Toluene, Ethylbenzene, m+p-Xylene, o-Xylene, 1-3 Butadiene
- Performs all the functions, such as: sampling, analysis and data management, in a simple and completely autonomous mode
- Self-contained, completely automated and ready to use in less than 30 minutes
- GC column equipped with an innovative liquid-cooler; retention times are stable even with a fluctuating temperature
- Long-life capillary column
- High sensitivity, stable and linear response PID detector
- Ultrafast trap heater (heating rate >160°C/second)
- Quick check of the chromatogram peaks possible directly on-screen, without the use of a computer
- Low memory effect allowing the automatic calibration of the analyser on a single cycle without an external PC
- Carrier Gas : H2 (Hydrogen)
- Ambient air monitoring
- Monitoring of industrial sources emitting VOCs
- Photochemical pollution studies (stationary and mobile laboratories)
- Other compounds on request: hexane, trimethylbenzene, i-octane, styrene…
Technical specifications | |
---|---|
Measured parameter | VOC (Benzene, Toluene, Ethylbenzene, m+p-Xylene, o-Xylene, 1,3 Butadiene) |
Technology | Gas Chromatography |
US-EPA Approval / QAL 1 Certification | YES |
Measurement ranges |
|
Measurement units | ppb, ppm, µg/m3 (user-selectable) |
Noise (σ) | ≤ 0.025 µg/m3 at 0.5 µg/m3 benzene |
Lower Detectable Limit (2σ) | ≤ 0.05% µg/m3 benzene |
Zero drift | ≤ 4% / 15 days |
Span drift | < 1% / 7 days |
Sample flow rate | 50 ml/min |
Temperature range | 0°C to +30°C |
Data storage | 1 year |
Included I/O | 1LAN / 1USB / WIFI / RS232-422 |
Weight (Kg) | 12.5 |
Dimensions mm (LxWxH) | 483 x 606 x 133 |
Chassis | 19″ Rack, 3U |
Power supply | ‘100~250Vac, 50/60Hz + ground |
- MAIN OPTIONS:
- ESTEL 2 max electronic boards with:
4 independent analog inputs (0-2.5 V) / outputs (0-1 V, 0-10 V, 0-20 mA, 4-20 mA)
4 remote control inputs
6 dry contacts - RS232 or RS422 serial interface (max. one Estel board if this option is used)
- Span gas input (atmospheric pressure)
- Span gas input under pressure (1 bar) for permanent connection to a gas cylinder
- COMPLIANCE WITH:
- ISO 13964, 2008/50/EC, EN14662-3:2016, the newest european regulation for benzene monitoring
- EN15267-1:2009, the EN15267-2:2009, 40 CFR PART 53 and 40 CFR PART 58
- QAL 1 certified by the TÜV to N° 0000069251